132 en BVIP Firmware Updates | AutoDome Easy II IP |
|
|
18 BVIP Firmware Updates
The AutoDome Easy II IP incorporates a network video server in the IP module. The primary function of the server is to encode video and control data for transmission over a TCP/IP network. The AutoDome Easy II IP also allows an operator to update the BVIP firmware via the TCP/IP network.
The latest BVIP firmware is available on the Bosch Security Systems Web site. To download the service pack from the Web, navigate to www.boschsecurity.us, click the CCTV link, then click Cameras, PTZ and navigate to the product page for the AutoDome Easy II IP. Then click the Software tab on the product page.
18.1Upgrading the AutoDome Easy II IP
The preferred method to update an AutoDome Easy II IP is through a direct connection between the camera and a PC. This method entails connecting the Ethernet cable from the camera directly to the Ethernet port of a PC.
If the
18.2Beginning the Firmware Update Process
Use this procedure to connect to your AutoDome Easy II IP and to navigate to the Firmware Update page.
1.Launch Internet Explorer and type the IP address for the AutoDome Easy II IP in the Address bar and click Go. Internet Explorer opens the Livepage view.
2.Click the SETTINGS link, located at the top of the page.
3.Click the Service link in the left pane.
4.Click the Maintenance link below the Service link.
5.Click the Search button and navigate to the firmware file (*.fw). Then, click OK.
6.Click the Upload button.
F.01U.164.576 2.0 2010.03 | Installation Manual | Bosch Security Systems, Inc. |