Bosch Appliances VEZ installation manual Programming the Inactivity Operation, Recorded Tours

120 en Common User Commands (unlocked) AutoDome Easy II IP

To add or remove scenes to Preposition Tour:

1.Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.

2.Use the Focus/Iris buttons to add or remove the selected scene from the tour.

To change the dwell period of a tour:

1.Press ON-15-ENTER to access the Tour Period Menu.

2.Follow the on-screen instructions.

14.4Programming the Inactivity Operation

You can program the AutoDome Easy II to automatically change its operating mode after a period of inactivity.

To access the Inactivity mode (locked command):

1.Press OFF-90-ENTERto turn off the command lock.

2.Press ON-9-ENTER to access the Inactivity Mode Menu.

3.Select one of the following choices:

–Return to Scene 1: Returns the camera position back to the first scene saved in memory.

–Recall Previous Aux: Returns the camera to the previous operating mode, such as a Preposition Tour.

14.5Recorded Tours

The AutoDome Easy II can make up to two (2) recorded tours. A Recorded Tour saves and then plays back up to 15 minutes of all manual camera movements made during the recording, including its rate of pan, tilt and zoom speeds and other lens setting changes.

To Record Tour A:

1.Press ON-100-ENTERto start recording a tour.

2.Press OFF-100-ENTERto stop recording.

To playback Recorded Tour A:

1.Press ON-50-ENTERto begin continuous playback.

2.Press OFF-50-ENTERor move the joystick to stop playback

F.01U.164.576 2.0 2010.03 Installation Manual Bosch Security Systems, Inc.