64 en Preparing the Wiring | AutoDome Easy II IP |
|
|
8.2Connecting the Power
The AutoDome Easy II IP is available as an indoor or as an outdoor model. Power to the camera in all indoor models is supplied via a single power connector or via a Power over Ethernet (PoE, IEEE 802.3af) connection using the existing CAT 5E Ethernet cable.
The outdoor models contain two 24 VAC isolated power connectors, one for the camera (red and black wires) and one for the heater (white/red and white/black wires).
NOTICE!
Use certified / Listed Class 2 power supply transformer only.
Determining Power Connections
The table below summarizes the necessary power connections for indoor and outdoor IP models. Use the table to identify the necessary connections and for direction to the proper section.
Model | Connection | Refer to | |
|
|
|
|
IP |
|
|
|
|
|
|
|
Indoor | 24 | VAC | Section 8.2.1 Power Connections to Indoor |
|
|
| Cameras, page 65 |
|
|
| |
| PoE to camera | Section 8.3 Ethernet Connection (IP | |
|
|
| models), page 67 |
|
|
|
|
Outdoor | 24 | VAC | Section 8.2.2 Power Connections to Outdoor |
|
|
| Cameras, page 66 |
|
|
|
|
| 24 | VAC to heater | Section 8.2.3 Power Connections to Heater |
|
|
| (all outdoor models), page 67 |
|
|
|
|
F.01U.164.576 2.0 2010.03 | Installation Manual | Bosch Security Systems, Inc. |