Bosch Appliances VEZ installation manual Attach Mounting Plate to Dome Cap

40 en Installing a Wall Mount AutoDome Easy II IP

5.1.4Installing the Camera to the Mounting Plate

To install the camera to the mounting plate, do the following:

1.Attach the mounting plate (supplied with dome) to the dome mounting cap with the three (3) screws supplied.

40 1.57

.
0	mm
in.

Figure 5.7 Attach Mounting Plate to Dome Cap

1Cable Hole (40 mm maximum; Crescent Shape

2 Mounting Screws for Dome Cap

2.Route wires on side of mounting plate with crescent shaped cut-out (Ref. #2 Figure 5.7).

3.Attach grounding wire from unit to the mounting cap (see Figure 5.9).

4.Attach user supplied ground to junction box.

5.Connect the mating connectors with the flying leads to the user supplied wiring (see the Section 8 Preparing the Wiring, page 63 for wiring information).

F.01U.164.576 2.0 2010.03 Installation Manual Bosch Security Systems, Inc.