AutoDome Easy II IP | Using the AutoDome Easy II IP en 83 |
|
|
Aux Control Tab
The Aux Control tab is used to enter
NOTICE!
The Aux Control tab can also be used to display the OSD menus. Once the OSD menus are displayed, the virtual joystick in the View Control tab can be used to navigate the menus, and the Focus and Iris buttons can be used to make menu selections.
Figure 11.2 Aux Control Tab
1 | Command number field |
2 | Keypad (numbers |
3 | Show a preset shot |
4 | Set a preset shot |
5 | Initiates a command |
6 | Deletes a number in the Command Number field |
7 | Used to select a menu item |
8 | Stops a command |
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |