Bosch Appliances VEZ installation manual Installing a Pipe Mount, Description

52 en Installing a Pipe Mount AutoDome Easy II IP

7Installing a Pipe Mount

7.1Description

This chapter details how to mount the AutoDome Easy II to a pipe. The AutoDome Easy II is also suitable for surface (Section 4 Installing a Surface Mount, page 22), wall (Section 5 Installing a Wall Mount, page 33), and recess mounting (Section 6 Installing a Recessed Mount, page 44). For specific directions on mounting the unit, see the manual that came with your mount.

For an outdoor installation you must obtain the gaskets and O- rings supplied with an AutoDome Easy II Outdoor Camera to ensure a water-tight environment inside the unit and to maintain an IP Environmental Protection Rating.

NOTICE!

The image sensors in modern CCD cameras are highly sensitive and require special care for proper performance and extended lifetime. Follow the guidelines for optimum results with your camera:

–Do not expose to direct sunlight or bright spotlights in

operating and nonoperating conditions.

–Avoid bright lights in the field of view of the camera. Bright lights cause a “smearing” effect, which is visible as white lines above and below the highlight. Prolonged exposure to bright lights may cause bleaching of the sensor's color filters. This will be visible as colored spots in the picture and is irreversible.

F.01U.164.576 2.0 2010.03 Installation Manual Bosch Security Systems, Inc.