AutoDome Easy II IP | Installing a Recessed Mount en 47 |
|
|
6.For AutoDome Easy II IP models: Adjust the clamping plate so that the bracket with plate is in the upper position.
a.Loosen the two screws (position 1) on each side of the clamping plate.
b.Move the screws to the upper position (position 2) and tighten.
7.Insert mount through the hole and into the ceiling. Slide clamps out and down so that the drywall is clamped in between the clamps and the bracket flange (41.7 mm (1.64 in.) maximum ceiling thickness and 12.7 mm (0.50 in.) minimum ceiling thickness).
8.Tighten both clamps to the ceiling using supplied screws and a #2 Phillips screwdriver.
Figure 6.4 Tighten Mounting Clamps
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |