46 en | Installing a Recessed Mount AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
4. Align holes of mounting plate (supplied with dome) with
mounting bracket and attach with screws. Ensure that
both the crescent shape of the mounting plate and the
crescent shape of the mounting bracket are aligned.
Figure 6.2 Attach Mounting Plate to Mounting Bracket
5. Ensure clamping plates are angled inward by pushing up
and into the two slots. Bracket with plate should be in the
lower position for AutoDome Easy II analog models.
Figure 6.3 Adjust Mounting Clamps
1 Mounting Bracket
2 Mounting Plate
3 Clamping Plate
4 Crescent Shape