AutoDome Easy II IP | Preparing the Wiring en 67 |
|
|
8.2.3Power Connections to Heater (all outdoor models)
Figure 8.3 Power Cable
| Ref. # | Wire | Color |
| 1 | 24 VAC | White/Red |
| 2 | 24 VAC | White/Black |
| 3 | User supplied Power Supply | n/a |
|
|
|
|
WARNING!
The heater unit accepts 24 VAC, 2 A power only. Do not connect 120 V or 230 V to this heater.
To connect the power to outdoor heaters:
1.Locate the cable assembly with a three (3) pin mating connector on one end and the white/red and white/black flying leads on the other end.
2.Connect one lead of the ground or 24 VAC power source to the white/black wire.
3.Connect one lead of the 24 VAC power source to the white/red wire.
8.3Ethernet Connection (IP models)
The AutoDome Easy II IP connects to a 10
Refer to Section 11 Using the AutoDome Easy II IP, page 74, for instructions on configuring an IP environment.
CAUTION!
Ethernet connections must be made to
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |