AutoDome Easy II IP | Using the AutoDome Easy II IP en 85 |
|
|
11.6Saving Snapshots
You can save individual images from the video sequence currently shown on the LIVEPAGE in JPEG format on your computer's hard drive. The icon for recording single images is only visible if the unit is configured to enable this process.
Click the icon. The image is saved at a resolution of
704 × 576 pixels (4CIF). The storage location depends on the configuration of the .
11.7Recording Video Sequences
You can save sections of the video sequence currently shown on the LIVEPAGE on your computer's hard drive. The icon for recording video sequences is only visible if the unit is configured to enable this process.
1.Click the icon to start recording. The storage location depends on the configuration of the AutoDome Easy II IP. A red dot in the icon indicates that recording is in progress.
2.Click the icon again to stop recording.
NOTICE!
You can play back saved video sequences using the Player from Bosch Security Systems, which can be installed from the product CD supplied.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the encoder (see Section 12.4 Basic Mode: Encoder Profile, page 90).
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |
