AutoDome Easy II IP | Installing a Surface Mount en 23 |
|
|
4.1.1Additional Tools Required
–Appropriate straight slot screwdrivers
–No. 2 Phillips screwdriver
–Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable)
–4 in. x 4 in. Junction box with 90 mm (3.54 in.) mount holes (indoor installation)
–Four (4) M4 or #10 pan head screws of an appropriate length to screw deep enough into the surface (outdoor installation)
–One (1) ground
–
–
–AutoDome Easy II Outdoor Camera, required for an outdoor installation
4.1.2Preparing the Surface Mount for an Indoor
Installation
The following instructions detail the preparation necessary to prepare the surface and the steps to install a Surface Mount.
1.Determine a secure location for the surface mount dome.
ø153.0
(6.02)
149.9
(5.88)
R50.6
(1.99)
Figure 4.1 Indoor Surface Mount Dimensions
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |