AutoDome Easy II IP | Using the AutoDome Easy II IP en 77 |
|
|
11.3Connecting the AutoDome Easy II IP to the
PC
1.Install the AutoDome Easy II IP according to the instructions in this manual.
2.Connect an Ethernet cable from the AutoDome Easy II IP RJ45 connector to a dedicated network switch to bypass the Local Area Network (LAN).
3.Connect the dedicated network switch to the RJ45 connector on the PC (see option A below).
NOTICE!
The AutoDome Easy II IP can also be connected directly to a PC using an Ethernet crossover cable with RJ45 connectors (see option B below).
Figure 11.1 AutoDome Easy II IP System Configuration
1AutoDome Easy II IP
2 IP Connection
3 Network Switch
4 Computer
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |
