Wireless-G Ethernet Bridge
Chapter 6: Connecting the Wireless-G Ethernet Bridge for Network Use
Connection to a Network Device
1.After configuration, unplug the power cable from the electrical outlet, and unplug the Ethernet network cable from the PC.
2.Plug the Ethernet network cable into the
3.Plug the power cable into a local electrical outlet.
The installation of the
Options,” if you want to mount the Bridge on a wall or have the Bridge stand on a surface.
Note: The Bridge features Power Over Ethernet (PoE) support. PoE technology allows a PoE adapter (also known as a power injector, power hub, or inline power device) to supply data and power to an Ethernet device using a single Ethernet network cable. To use the Bridge’s PoE feature, follow the instructions for your specific PoE device.
Placement Options
There are three ways to place the Bridge. The first way is to place the Bridge horizontally on a surface, as shown in Figure
Wall Mount Option
1.The Bridge has eight rubber inserts, four on each side. Depending on how you want to mount the Bridge, remove two of the rubber inserts.
2.Attach two screws to the wall, so that the Bridge’s
3.Maneuver the Bridge so the screws are inserted into the two slots.
4.If necessary, adjust the antenna so that it points straight up in the air.
The installation of the
Figure 6-1: Horizontal Placement
Chapter 6: Connecting the | 14 |
Connection to a Network Device
