Linksys WET54G V3 manual GettingtoKnowtheWireless-GEthernetBridge, Lan

Wireless-G Ethernet Bridge

Chapter3:GettingtoKnowtheWireless-GEthernetBridge

The Back Panel

All connections to the Bridge are made through the ports on its back panel, shown in Figure 3-1.

Reset	When pressed, the Reset button resets the Bridge to its factory default settings.
	Important: If you reset the Wireless-G Ethernet Bridge, you will
	erase all of your settings (WEP encryption, wireless settings,
	etc.) and replace them with the factory defaults. Do not reset the
	Wireless-G Ethernet Bridge if you want to retain these settings.
LAN	The LAN port is where you will connect the Ethernet network cable.
Power	The Power port is where you will connect the power adapter.
	NOTE: If you use a Power over Ethernet (PoE) device to supply
	data and power through the Ethernet network cable, then you
	do not need to use the Power port.

Figure 3-1: Back Panel

Chapter 3: Getting to Know the Wireless-G Ethernet Bridge 6

The Back Panel