Wireless-G Ethernet Bridge

WPA Pre-Shared Key

WPA gives you TKIP for the encryption method. Enter a WPA Shared Key of 8-32 characters. (See Figure 7-6.) Enter a key shared between the Bridge and the server.

Click the Apply button to save your changes. If your page doesn’t automatically refresh itself, then click the Refresh button of your web browser. Click the View Log button to view a log.

The Log Table screen appears in Figure 7-7. The log shows the authentication process.

Click the Refresh button to refresh the screen. Click the Close button to return to the the previous screen.

Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility

Figure 7-6: WPA Pre-Shared Key

Figure 7-7: Log Table

20

Setup

Page 26
Image 26
Linksys WET54G V3 manual WPA Pre-Shared Key