AutoDome Easy II IP | Installing a Surface Mount en 29 |
|
|
12.Secure the mounting plate to the Surface Mount Junction Box with the three (3) M4
4 | |
1 | 0 |
. | |
| 57 |
. |
|
0 | mm |
| |
in. |
Figure 4.8 Install the Mounting Plate
1Junction Box Holes
2Cable Hole (40 mm maximum); Crescent Shape
13.Skip to Section 4.1.4 Installing the Camera to the Mounting Plate, page 29, to continue the installation.
4.1.4Installing the Camera to the Mounting Plate
To install the camera to the mounting plate for a surface or suspended ceiling, do the following (certain steps contain additional information for outdoor installations):
1.Route wires on side of mounting plate with crescent shaped
2.Attach grounding wire from unit to junction box.
3.Attach user supplied ground to junction box.
4.Connect the mating connectors with the flying leads to the user supplied wiring (see Section 8 Preparing the Wiring, page 63 for wiring information).
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |