AutoDome Easy II IP | Alarms and Relay Connections en 69 |
|
|
9Alarms and Relay Connections
9.1Alarm Input
The AutoDome Easy II provides two alarm inputs. Each input can be activated by dry contact devices such as pressure pads, passive infrared detectors, door contacts, and similar devices. The AutoDome Easy II comes with the following alarm in/out cable.
Figure 9.1 Four-wire Alarm In/Out Cable
Wire Color | Function |
White | Alarm Out |
Brown | Alarm In 1 |
Orange | Alarm In 2 |
Green | Ground |
The table below summarizes the size and distance wires.
Wire Size | Maximum Distance | |||
|
|
|
| |
AWG |
| mm | feet | meters |
|
|
|
|
|
22 |
| 0.644 | 500 | 152.4 |
|
|
|
|
|
18 |
| 1.024 | 800 | 243.8 |
|
|
|
|
|
Table 9.1 | Alarm Wire Guide |
|
You wire alarms either Normally Open (N.O.) or Normally Closed (N.C.), and must program the alarm inputs N.O. (the default) or N.C. through the AutoDome Easy II main menu.
Bosch Security Systems, Inc. | Installation Manual | F.01U.164.576 2.0 2010.03 |