28 en | Installing a Surface Mount AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
10. Attach the Surface Mount Junction Box to the surface
using four (4) user-supplied M4 or #10 pan head screws
(screws not supplied). Use a minimum screw length of
10 mm (.39 in.).
Note: For an outdoor installation ensure that the four (4)
3.97 mm I.D. by Ø1.78 mm O-rings are threaded onto the
four (4) M4 or #10 user-supplied pan head screws. Refer to
step 5.
Figure 4.7 Atta ch surface mount to ceiling
11. Route the external wires through the conduit and into the
Surface Mount Junction Box.
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.