AutoDome Easy II IP Installing a Surface Mount | en 31
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
8. Attach the camera to the mounting plate by inserting the
vertical tab into the recessed slot on the top of the camera
dome to the right of the safety locking screw.
Figure 4.11 Attach Safety Locking Screw
9. Rotate the camera approximately 15 degrees to the right
and lock firmly into place, as shown in the next illustration.
Note: Do not loosen brass mounting buttons.
Figure 4.12 Attach D ome to Mounti ng Plate
1 Vertical tab
5