38 en Installing a Wall Mount | AutoDome Easy II IP |
|
|
6.Attach the mounting cap to the arm. Using the AutoDome Easy II Outdoor Installation Kit, apply the following
Figure 5.5 O-ring and retaining ring for outdoor installation
1
2 Retaining ring with gasket
3 M3
a.Thread the 21.82 mm I.D. by Ø3.00 mm
b.Secure the retaining ring gasket (item 2, above) to the dome cap with the three (3) M3
c.Attach the dome cap to the arm mount.
7.Feed the wires through the hole in the surface, through the wall mount flat gasket (item 1, Figure 5.6) and then through the arm.
CAUTION!
All wires for installation applications must be routed through a grounded conduit.
F.01U.164.576 2.0 2010.03 | Installation Manual | Bosch Security Systems, Inc. |