Operation, Spray Tip Installation | Graco 395/490/495/595 instruction

Operation

Operation

Spray Tip Installation

1.Perform Pressure Relief Procedure , page 13.

2.Use spray tip (A) to insert OneSeal™ (B) into tip guard (C).

C

B

A

ti24653a

2. Insert Spray Tip.

ti24664a

3. Screw assembly onto gun. Tighten.

ti24652a

Spray

1.Spray test pattern. Adjust pressure to eliminate heavy edges.

ti24669a

334530A

21

Image 21

Graco 395/490/495/595 important safety instructions Operation, Spray Tip Installation, Perform Pressure Relief Procedure

Contents

Contractor/FTx Related ManualsSG3 334599 Contents Hi-Boy ModelsStand Lo-Boy Model Extension Cords Grounding Fire and Explosion Hazard Equipment Misuse Hazard Personal Protective Equipment Stand Models Component Identification Lo-Boy Models Hi-Boy Models Hi-Boy Models Grounding Power RequirementsExtension Cords Pails Pressure Relief Procedure Trigger Lock 334530A Setup Ti24638a Make certain ON/OFF switch is OFF Setup Startup Perform Pressure Relief Procedure 20 s Perform Pressure Relief Procedure, Spray Tip InstallationOperation Spray Clear Tip Clog Pressure Display Perform Pressure Relief Procedure, Digital DisplayStored Data Display Ti2824a Fast Flush Drain Tube Cleanup To flush drain tube and pump turn prime valve down Fast Flush Hose and Gun If flushing with water, flush again with Activity Interval Maintenance Troubleshooting Mechanical/Fluid FlowRefer to this column Properly installed to allow full Possible during priming Error Code Messages Perform Pressure Relief Procedure,Electrical System see Pressure Relief Problem What to Check How to check Displays Code 03 message Step Ohms Motor thermal device When cool, correct cause Sprayer Will Not Run Sprayer Will Not Run Ohms Sprayer Will Not Shut Off Troubleshooting Procedure See 395/490/495 Stand Sprayers 132 395/490/495 Stand Sprayers Parts List Ref. Part DescriptionQty 395/490/495/595 Lo-Boy Sprayers 117 132 395/490/495/595 Lo-Boy Sprayers Parts List 395/490/495/595 Hi-Boy Sprayers 117 Ref. Part 395/490/495/595 Hi-Boy Sprayers Parts List Alert  Accessories and Labels Control Box Grommet Control Box Parts List Control Box 120V, US/Japan Wiring Diagrams 110V, UK 395/490/495/595 Technical Specifications Noise** dBa @ 70 psi 0.48 MPa, 4.8 bar For Graco Canada Customers Graco Standard Warranty International Offices Belgium, China, Japan, Korea Graco Information