Graco 395/490/495/595 important safety instructions 20 s

Startup

8.Move gun to paint pail and trigger for 20 seconds. Release trigger and allow sprayer to build pressure. Engage trigger lock.

10.Screw tip assembly onto gun and tighten. See Spray Tip Installation, page 21. For gun assembly instructions, see separate gun manual.

20 s

ti24649a

ti24652a

High-pressure spray is able to inject toxins into the body and cause serious bodily injury. Do not stop leaks with hand or rag.

9.Inspect for leaks. If leaks occur, perform Pressure Relief Procedure, page 13, then tighten all fittings and repeat Startup procedure. If there are no leaks continue with the next step.

20 334530A