Korg 2 manual Program, Combination, Sequencer, Song Play parameters

Parameters that can be loaded/saved to disk in version 2.0, but not in version 1.0

1.Program, Combination, Sequencer, Song Play parameters

•Each mode 6.1-1 (1.1-1): “KARMA Time Signature”

•Each mode 6.2-3: “Start Seed”

•Each mode 6.2-3: “Freeze Loop Length”

•Each mode 6.4-1(2): RT Parameter - “Start Seed” / “Rand Group”

•Each mode 6.4-1(2): RT Parameter - “Loop Length (Freeze Loop Length)” / “Rand Group”

•Each mode 6.4-1(2): RT Parameter “Time Sig. (Time Signature)” / “PE Group”

•Version 2.0 → Version 1.0

If the above parameters are loaded in version 1.0, the settings will be ignored since these parameters do not exist.

•Version 1.0 → Version 2.0

In version 2.0, the above parameters will be set to their default values.

2. Sequencer mode “Tone Adjust” parameters (5.3-1–6)

•Version 2.0 → Version 1.0

These will be ignored since version 1.0 does not have the “Tone Adjust” parameters.

•Version 1.0 → Version 2.0

In version 2.0, the “Tone Adjust” parameter settings will be set to their default values.

3.Program, Combination, Sequencer, Song Play modes TxFltr “Notes“ parameter (Program mode: 6.1-4, Other modes: 6.1-6)

•Version 2.0 → Version 1.0

Version 1.0 will maintain this as internal data, but will ignore it. However, if you save this state as a .PCG file, the setting will be saved to disk.

•Version 1.0 → Version 2.0

In version 2.0, the TxFltr “Notes“ parameter will be turned On (checked).

4.Global mode RT (Realtime Command) parameter (2.1-1), “S/S Out P/C (Start/Stop Out P/C)“

•Version 2.0 → Version 1.0

Version 1.0 will maintain this as internal data, but will ignore it. However, if you save this state as a .PCG file, the setting will be saved to disk.

•Version 1.0 → Version 2.0

In version 2.0, this parameter will be turned Off (un- checked).

5.Global mode settings that were added in version 2.0

•“Foot Switch Assign“ (6.1-1) Tap Tempo…KARMA Chord Trigger setting

•“Foot Pedal Assign” (6.1-1) JS+Y (CC#01)…KARMA RTC Knob 8 setting

•“MIDI Clock” (2.1-1) Auto setting

•Version 2.0 → Version 1.0

The version 1.0 “Foot Switch Assign“ parameter will be set to Cue Repeat Control, “Foot Pedal Assign” will be set to MFX Send2 (CC#91), and “MIDI Clock” will be set to

External.

6.Program, Combination, Sequencer, and Song Play mode GE Select: 1190 (U-A)…1509 (U-J) settings that were added in version 2.0

•Version 2.0 → Version 1.0

Since version 1.0 does not have these GE numbers, it will not play or operate correctly.

7.GE parameters and GE parameter values that were added in version 2.0 (6.3-1–4)

•Version 2.0 → Version 1.0

Since version 1.0 does not have these GE parameters, it will not play or operate correctly.

•Version 1.0 → Version 2.0

When this data is loaded into version 2.0, the values of the added parameters will be set so that the data will sound and operate correctly. The added GE parameters will be set to their default values.

However for some version 1.0 GEs and GE parameter settings, the parameters may be automatically re-set in version 2.0.

26