60 en Installing a Pipe Mount | AutoDome Easy II IP |
|
|
7.1.3Installing the Camera to the Mounting Plate
To install the camera to a ceiling mount using the supplied mounting plate, do the following:
1.Route wires on side of mounting plate with crescent shaped
2.Attach grounding wire from unit to mounting cap.
3.Attach user supplied ground to junction box.
4.Connect the mating connectors with the flying leads to the user supplied wiring (see the Section 8 Preparing the Wiring, page 63 for wiring information).
5.Unlock the single safety locking screw on the base of the unit using the
Figure 7.7 Unlock Safety Locking Screw
6.Plug the matching connectors from the camera into the mating connectors from the ceiling.
7.Align wires on side of mounting plate with crescent shaped
F.01U.164.576 2.0 2010.03 | Installation Manual | Bosch Security Systems, Inc. |