Bosch Appliances VEZ installation manual O-ring and retaining ring for outdoor installation

AutoDome Easy II IP Installing a Surface Mount en 27

7.Attach the retaining ring with gasket (item 2, below) to the Surface Mount Junction Box. These parts are supplied with the AutoDome Easy II Outdoor Camera. Ensure that the side of the retaining ring with the counter-sunk screw holes is facing you.

Figure 4.6 O-ring and retaining ring for outdoor installation

1M3 – .5 x 6 Phillips flat head machine screws

(supplied with AutoDome Easy II Outdoor Camera)

2Retaining ring with gasket

(supplied with AutoDome Easy II Outdoor Camera)

3O-ring, 3.97 mm I.D. by Ø1.78 mm

(supplied with AutoDome Easy II Outdoor Camera)

4User-supplied M4 or #10 pan head screws

8.Determine the side of the Surface Mount Junction box in which the external wires are to be routed and remove the plug from the knockout.

9.Apply a 1/2-inch (15-mm) NPS fitting to the chosen knockout. Ensure a water-tight fitting to maintain the IP Environmental Protection Rating for the unit.

Bosch Security Systems, Inc. Installation Manual F.01U.164.576 2.0 2010.03