Yamaha WR45OFR service manual Installation, Front fork top end standard a Zero mm Zero

FRONT FORK CHAS

26.Tighten:

● Cap bolt (locknut) 1

T .

R .

29 Nm (2.9 m · kg, 21 ft · lb)

NOTE:

●While compressing the fork spring, set the thin type spanners 2 between the spacer 3 and spring guide 4.

●Hold the locknut 5 and tighten the cap bolt with specified torque.

27.Install:

●Cap bolt 1 To outer tube.

NOTE:

Temporarily tighten the cap bolt.

28.Install:

● Protector guide 1

Installation

1.Install:

● Front fork 1

NOTE:

●Temporarily tighten the pinch bolts (under bracket).

●Do not tighten the pinch bolts (handle crown) yet.

2. Tighten:

● Cap bolt 1

T .

R .

30 Nm (3.0 m · kg, 22 ft · lb)

3.Adjust:

● Front fork top end a

Front fork top end (standard) a:

Zero mm (Zero in)

5 - 38