REAR SHOCK ABSORBER CHAS

EC586000

HANDLING NOTE

WARNING

This shock absorber is provided with a separate type tank filled with high-pressure nitrogen gas. To prevent the danger of explosion, read and understand the follow- ing information before handling the shock absorber.

The manufacturer can not be held respon- sible for property damage or personal injury that may result from improper han- dling.

1.Never tamper or attempt to disassem- ble the cylinder or the tank.

2.Never throw the shock absorber into an open flame or other high heat. The shock absorber may explode as a result of nitrogen gas expansion and/ or damage to the hose.

3.Be careful not to damage any part of the gas tank. A damaged gas tank will impair the damping performance or cause a malfunction.

4.Take care not to scratch the contact surface of the piston rod with the cylin- der; or oil could leak out.

5.Never attempt to remove the plug at the bottom of the nitrogen gas tank. It is very dangerous to remove the plug.

6.When scrapping the shock absorber, follow the instructions on disposal.

EC587000

NOTES ON DISPOSAL (YAMAHA DEALERS ONLY)

Before disposing the shock absorber, be sure to extract the nitrogen gas from valve 1. Wear eye protection to prevent eye damage from escaping gas and/or metal chips.

WARNING

To dispose of a damaged or worn-out shock absorber, take the unit to your Yamaha dealer for this disposal procedure.

5 - 63

Page 288
Image 288
Yamaha WR45OFR service manual EC586000