Yamaha WR45OFR service manual Rear Brake PAD Insulator Inspection, Brake Fluid Level Inspection

REAR BRAKE PAD INSULATOR INSPECTION/ BRAKE FLUID LEVEL INSPECTION

INSP

ADJ

Åı

3.Inspect:

●Brake fluid level

Refer to “BRAKE FLUID LEVEL INSPECTION” section.

4.Check:

●Brake pedal operation

A softy or spongy feeling → Bleed brake system.

Refer to “BRAKE SYSTEM AIR

BLEEDING” section.

EC36b000

REAR BRAKE PAD INSULATOR

INSPECTION

1.Remove:

●Brake pad

Refer to “REAR BRAKE PAD INSPEC- TION AND REPLACEMENT” section.

2.Inspect:

●Rear brake pad insulator 1 Damage → Replace.

EC367001

BRAKE FLUID LEVEL INSPECTION

1.Place the master cylinder so that its top is in a horizontal position.

2.Inspect:

●Brake fluid level

Fluid at lower level → Fill up.

aLower level

ÅFront ı Rear

Recommended brake fluid:

DOT #4

WARNING

●Use only designated quality brake fluid to avoid poor brake performance.

●Refill with same type and brand of brake fluid; mixing fluids could result in poor brake performance.

●Be sure that water or other contaminants do not enter master cylinder when refill- ing.

●Clean up spilled fluid immediately to avoid erosion of painted surfaces or plas- tic parts.

3 - 32