Yamaha WR45OFR service manual Install Bolt starter clutch

AC MAGNETO AND STARTER CLUTCH

ENG

5.Install:

● Bolt (starter clutch) 1

T .

R .

16 Nm (1.6 m · kg, 11 ft · lb)

●Plain washer (rotor)

●Nut (rotor) 2

T .

R .

65 Nm (6.5 m · kg, 47 ft · lb)

NOTE:

Tighten the rotor nut to 65 Nm (6.5 m·kg, 47 ft·lb), loosen and retighten the rotor nut to 65 Nm (6.5 m·kg, 47 ft·lb).

6.Install:

●Shaft 1

●Bearing 2

●Idle gear 2 3

NOTE:

Apply the engine oil on the shaft, bearing and idle gear inner circumference.

7.Install:

● Dowel pin

● Gasket [crankcase cover (left)] New

●Crankcase cover (left) 1

●Bolt [crankcase cover (left)]

T .

R .

10 Nm (1.0 m · kg, 7.2 ft · lb)

NOTE:

Tighten the bolts in stage, using a crisscross pattern.

8.Install:

●Shaft 1

●Bearing 2

●Idle gear 1 3

NOTE:

Apply the engine oil on the shaft, bearing and idle gear inner circumference.

9.Install:

● Cover (idle gear 1) 1

● Bolt 2 T.R. 10 Nm (1.0 m · kg, 7.2 ft · lb)

NOTE:

Install the cover (idle gear 1) with its mark a facing upward.

4 - 81