Yamaha WR45OFR service manual Tighten Bolt axle holder

FRONT WHEEL AND REAR WHEEL CHAS

1

8.Tighten:

● Bolt (axle holder) 1

T.R. 23 Nm (2.3 m · kg, 17 ft · lb)

NOTE:

Before tightening the bolt, fit the wheel axle to the axle holder by stroking the front fork sev- eral times with the front brake applied.

9.Install:

● Brake hose 1

T.R. 10 Nm (1.0 m · kg, 7.2 ft · lb)

To brake hose holder 2.

NOTE:

Before tightening the bolt (brake hose holder), align the top a of the brake hose neck with the brake hose holder bottom b. Then pass the brake hose in front of the axle boss c and fit it into the hose groove d so that the brake hose does not contact the nut (wheel axle).

10.Install:

●Hose cover 1

●Plain washer 2

●Bolt [hose cover (M8)] 3

T.R. 16 Nm (1.6 m · kg, 11 ft · lb)

●Bolt [hose cover (M6)] 4

T.R. 7 Nm (0.7 m · kg, 5.1 ft · lb)

11.Install:

● Trip meter cable 1

5 - 7