Yamaha WR45OFR service manual Replacement steps, Oil filter cover 10 Nm 1.0 m kg, 7.2 ft lb

ENGINE OIL REPLACEMENT

INSP

ADJ

6.If the oil filter is to be replaced during this oil change, remove the following parts and reinstall them.

Replacement steps:

●Remove the exhaust pipe.

●Remove the oil filter cover 1 and oil filter element 2.

●Check the O-rings 3, if cracked or dam- aged, replace them with a new one.

●Install the oil filter element and oil filter cover.

T .

R .

Oil filter cover:

10 Nm (1.0 m • kg, 7.2 ft • lb)

7. Install:

● Plain washer 1 New

●Oil strainer (frame) 2

T .

R .

90 Nm (9.0 m · kg, 65 ft · lb)

●Engine oil hose 3

●Bolt (engine oil hose) 4

T .

R .

10 Nm (1.0 m · kg, 7.2 ft · lb)

●Engine oil hose clamp 5

T .

R .

2 Nm (0.2 m · kg, 1.4 ft · lb)

●Engine skid plate

8.Install:

●Gaskets New

●Oil filter drain bolt

T .

R .

10 Nm (1.0 m · kg, 7.2 ft · lb)

●Drain bolt (crankcase rear)

T .

R .

20 Nm (2.0 m · kg, 14 ft · lb)

●Drain bolt (crankcase left)

T .

R .

10 Nm (1.0 m · kg, 7.2 ft · lb)

●Drain bolt (frame)

T .

R .

23 Nm (2.3 m · kg, 17 ft · lb)

9.Fill:

● Crankcase

Oil quantity:

Total amount:

1.2L (1.06 Imp qt, 1.27 US qt) Periodic oil change:

1.0L (0.88 Imp qt, 1.06 US qt) With oil filter replacement:

1.1L (0.97 Imp qt, 1.16 US qt)

10.Install:

●Oil filler plug

11.Inspect:

●Engine (for oil leaks)

●Oil level

Refer to “ENGINE OIL LEVEL INSPEC- TION”.

3 - 17