CABLE ROUTING DIAGRAM

SPEC

EC240000

CABLE ROUTING DIAGRAM

1 Fuel tank breather hose

G Lights switch lead

2 Clamp

H Brake hose

3 Diode

I Hose guide

4 Wire harness

J Carburetor breather hose

5 Hot starter cable

K Overflow hose

6 Negative battery lead

L Coolant reservoir tank breather

7 Starter motor lead

hose

8 TPS (throttle position sen-

 

sor) lead

Å Insert the fuel tank breather

9 Neutral switch lead

hose into the hole in the steering

0 Oil hose

shaft cap.

A Hose holder

ı Fasten the diode of the wire har-

B Radiator hose 4

ness and rectifier/regulator lead

C Cylinder head breather hose

(at its protecting tube) to the

D AC magneto lead

frame at the white tape for the

E Radiator hose 1

diode with a plastic locking tie

F Oil tank breather hose

and cut off the tie end.

ÇFasten the wire harness, recti- fier/regulator lead, coolant res- ervoir hose and hot starter cable to the frame with a plastic lock- ing tie and cut off the tie end.

ÎFasten the wire harness, recti- fier/regulator lead and coolant reservoir hose to the frame with a plastic locking tie and cut off the tie end.

‰Fasten the wire harness to the frame at its white tape with a plastic locking tie and cut off the tie end.

2 - 23

Page 59 Page 61
Page 60
Image 60
Yamaha WR45OFR service manual Cable Routing Diagram
Page 59 Page 61
Top Page Image Contents