FRONT FORK CHAS

EC556000

HANDLING NOTE

NOTE:

The front fork requires careful attention. So it is recommended that the front fork be main- tained at the dealers.

CAUTION:ACHTUNG:

To prevent an accidental explosion of air, the following instructions should be observed:

The front fork with a built-in piston rod has a very sophisticated internal con- struction and is particularly sensitive to foreign material.

Use enough care not to allow any foreign material to come in when the oil is replaced or when the front fork is disas- sembled and reassembled.

Before removing the cap bolts or front forks, be sure to extract the air from the air chamber completely.

EC553000

REMOVAL POINTS

EC553150

Cap bolt

1.Remove:

Cap bolt 1

From the outer tube.

NOTE:

Before removing the front fork from the machine, loosen the cap bolt.

2.Remove:

Cap bolt 1

NOTE:

While compressing the fork spring, set the thin type spanners 2 between the spacer 3 and spring guide 4.

Hold the locknut 5 and remove the cap bolt.

5 - 29

Page 254
Image 254
Yamaha WR45OFR service manual Handling Note, Cap bolt