3 - 48
INSP
ADJ
ELECTRICAL/SPARK PLUG INSPECTIONEC370000
ELECTRICALEC371001
SPARK PLUG INSPECTION
1. Remove:
●Spark plug
2. Inspect:
●Electrode 1
Wear/damage → Replace.
●Insulator color 2
Normal condition is a medium to light
tan color.
Distinctly different color → Check the
engine condition.
NOTE:
When the engine runs for many hours at low
speeds, the spark plug insulator will become
sooty, even if the engine and carburetor are in
good operating condition.
3. Measure:
●Plug gap a
Use a wire gauge or thickness gauge.
Out of specification → Regap.
Spark plug gap:
0.7 ~ 0.8 mm (0.028 ~ 0.031 in)
4. Clean the plug with a spark plug cleaner
if necessary.
5. Tighten:
●Spark plug
NOTE:
●Before installing a spark plug, clean the gas-
ket surface and plug surface.
●Finger-tighten a the spark plug before
torquing to specification b.
T
R
.
.
13 Nm (1.3 m · kg, 9.4 ft · lb)