REAR BRAKE ADJUSTMENT/ FRONT BRAKE PAD INSPECTION AND REPLACEMENT

INSP

ADJ

Åı

EC364002

REAR BRAKE ADJUSTMENT

1.Check:

Brake pedal height a

Out of specification Adjust.

Brake pedal height a: 5 mm (0.20 in)

2.Adjust:

Brake pedal height

Pedal height adjustment steps:

Loosen the locknut 1.

Turn the adjusting nut 2 until the pedal height a is within specified height.

Tighten the locknut.

WARNING

Adjust the pedal height between the maximum Å and the minimum ı as shown. (In this adjustment, the bolt 3 end b should protrude out of the threaded portion 4 but not be less than 2 mm (0.08 in) c away from the brake pedal 5).

After the pedal height adjustment, make sure that the rear brake does not drag.

EC365080

FRONT BRAKE PAD INSPECTION AND REPLACEMENT

1.Inspect:

Brake pad thickness a

Out of specification Replace as a set.

Brake pad thickness a:

 

 

 

Standard

<Limit>

 

 

4.4 mm (0.17 in)

1.0 mm (0.04 in)

 

 

 

2.Replace:

Brake pad

Brake pad replacement steps:

Remove the pad pin plug 1.

3 - 28

Page 93
Image 93
Yamaha WR45OFR service manual Rear Brake Adjustment, Front Brake PAD Inspection and Replacement