2 - 27
SPEC
CABLE ROUTING DIAGRAM
1Starter motor lead
2Negative battery lead
3Wire harness
4Clamp
5Taillight lead
6Coolant reservoir tank
breather hose
7Coolant reservoir hose
8Positive battery lead
9Starting circuit cut-off
relay
0Battery
ÅPosition the starter motor lead,
negative battery lead and wire
harness in the tank damper slit.
ıFasten the wire harness to the
frame with a plastic locking tie and
cut off the tie end.
ÇDo not allow the taillight lead to
slacken.
ÎPass the starter motor lead and
negative battery lead over the car-
buretor.
‰Fasten the coolant reservoir tank
breather hose, coolant reservoir
hose and rectifier/regulator lead to
the frame with a plastic band.
ÏFasten the coolant reservoir tank
breather hose and coolant reser-
voir hose to the frame with a plas-
tic band.
ÌPass the coolant reservoir hose
on the outside of the coolant res-
ervoir tank breather hose.