Yamaha WR45OFR Fuse Inspection, First, connect the positive lead 1, then the negative lead

FUSE INSPECTION

INSP

ADJ

6.Install:

●Battery

●Battery band

7.Connect:

●Battery leads

(to the battery terminals)

CAUTION:

First, connect the positive lead 1, then the negative lead 2.

8.Check:

●Battery terminals

Dirt → Clean with a wire brush.

Loose connection → Connect properly.

9.Lubricate:

●Battery terminal

Recommended lubricant

Lithium soap base grease

10. Install:

●Seat

EAS00181

FUSE INSPECTION

21

CAUTION:

To avoid a short circuit, always set the main switch to “OFF” when checking or replacing a fuse.

1.Remove:

●Seat

●Fuse cover

2.Check:

●Continuity

Checking steps:

●Remove the fuse 1.

●Connect the pocket tester to the fuse and check the continuity.

NOTE:

Set the pocket tester selector to “Ω ⋅ 1”.

Pocket tester

YU-3112-C/90890-03112

●If the pocket tester indicates “∞”, replace the fuse.

2Reserve fuse

3 - 56