Yamaha WR45OFR service manual 80 Nm 8.0 m · kg, 58 ft · lb

SWINGARM CHAS

3.Install:

●Collar 1

To connecting rod 2.

NOTE:

Apply the molybdenum disulfide grease on the collar and oil seal lips.

4.Install:

●Connecting rod 1

●Bolt (connecting rod) 2

●Plain washer 3

●Nut (connecting rod) 4

T .

R .

80 Nm (8.0 m · kg, 58 ft · lb)

To relay arm 5.

NOTE:

Apply the molybdenum disulfide grease on the bolt.

5.Install:

●Relay arm 1

●Bolt (relay arm) 2

●Plain washer 3

●Nut (relay arm) 4 To swingarm.

NOTE:

●Apply the molybdenum disulfide grease on the bolt.

●Do not tighten the nut yet.

6.Install:

●Swingarm 1

●Pivot shaft 2

T .

R .

85 Nm (8.5 m · kg, 61 ft · lb)

NOTE:

●Apply the molybdenum disulfide grease on the pivot shaft.

●Insert the pivot shaft from right side.

7.Check:

●Swingarm side play a

Free play exists → Replace thrust bear- ing.

●Swingarm up and down movement b

Unsmooth movement/binding/rough spots → Grease or replace bearings,

bushes and collars.

5 - 57