Yamaha WR45OFR service manual Cap bolt, Assembly and Installation Front fork assembly

FRONT FORK CHAS

EC554700

Cap bolt

1.Inspect:

●Cap bolt 1

●O-ring 2

●Air bleed screw 3 Wear/damage → Replace.

EC555000

ASSEMBLY AND INSTALLATION Front fork assembly

1. Wash the all parts in a clean solvent.

2.Install:

●Damper rod 1 To inner tube 2.

CAACUHTUTIONNG: :

To install the damper rod into the inner tube, hold the inner tube aslant. If the inner tube is held vertically, the damper rod may fall into it, damaging the valve inside.

3. Install:

● Copper washer 1 New

●O-ring 2

●Base valve 3 To inner tube 4.

4.Tighten:

●Base valve 1

T .

R .

55 Nm (5.5 m · kg, 40 ft · lb)

NOTE:

●Use a damper rod holder 2 to lock the damper rod 3.

●Apply the LOCTITE® on the base valve thread.

Damper rod holder:

YM-1423/90890-01423

5 - 32