Yamaha WR45OFR service manual Install Engine guard Clamp Bolt engine guard front

AC MAGNETO AND STARTER CLUTCH

ENG

10.Install:

●Engine guard 1

●Clamp 2

●Bolt [engine guard (front)] 3

T .

R .

34 Nm (3.4 m · kg, 24 ft · lb)

●Bolt [engine guard (rear)] 4

T .

R .

23 Nm (2.3 m · kg, 17 ft · lb)

●Cylinder head breather hose 5

11.Connect:

●AC magneto lead

Refer to “CABLE ROUTING DIA- GRAM” section in the CHAPTER 2.

12.Install:

●Shift pedal 1

●Bolt (shift pedal)

T .

R .

12 Nm (1.2 m · kg, 8.7 ft · lb)

NOTE:

When installing the shift pedal onto the shift shaft, be sure that the center of the shift pedal is about 1 mm (0.04 in) a above the top of the footrest.

4 - 82