Yamaha WR45OFR Control Functions, Main Switch, Main switch indicator light, Engine Stop Button

CONTROL FUNCTIONS

EC150000

GEN

INFO

CONTROL FUNCTIONS

MAIN SWITCH

Functions of the respective switch positions are as follows:

ON:

The engine can be started only at this position. OFF:

All electrical circuits are switched off.

Main switch indicator light

The main switch 1 is equipped with an indica- tor light 2 to avoid forgetting to turn it off. This light functions as follows.

●It lights up with the main switch “ON”.

●It goes out when the engine increases its speed after being started.

●It lights up again when the engine is stopped.

NOTE:

If the indicator light will not light up with the main switch “ON”, it shows a lack of the battery voltage. Recharge the battery. If the engine is kick started, turn off the light switch.

EC151000

“ENGINE STOP” BUTTON

The “ENGINE STOP” button 1 is located on the left handlebar. Continue pushing the “ENGINE STOP” button till the engine comes to a stop.

START SWITCH

The start switch 1 is located on the right han- dlebar. Push this switch to crank the engine with the starter.

1 - 10