STEERING CHAS

4.Install:

Plain washer 1

Ring nut 2

T .

R .

7 Nm (0.7 m · kg, 5.1 ft · lb)

Tighten the ring nut using the ring nut wrench 3.

Refer to “STEERING HEAD INSPEC- TION AND ADJUSTMENT” section in the CHAPTER 3.

5.Check the steering shaft by turning it lock to lock. If there is any binding, remove the steering shaft assembly and inspect the steering bearings.

6.Install:

Plain washer 1

7.Install:

Front fork 1

Handle crown 2

Main switch 3

Coupler bracket 4

Hose guide bracket 5

NOTE:

Install the coupler bracket on the outside of the hose guide bracket.

Temporarily tighten the pinch bolts (under bracket).

Do not tighten the pinch bolts (handle crown) yet.

8.Install:

Plain washer 1

Steering shaft nut 2

T .

R .

145 Nm (14.5 m · kg, 105 ft · lb)

5 - 50

Page 275
Image 275
Yamaha WR45OFR service manual Install Plain washer Ring nut