Yamaha WR45OFR service manual Tire Pressure Check, Standard tire pressure KPa 1.0 kgf/cm2, 15 psi

TIRE PRESSURE CHECK/SPOKES INSPECTION AND TIGHTENING/WHEEL INSPECTION

INSP

ADJ

EC36Q000

TIRE PRESSURE CHECK

1.Measure:

●Tire pressure

Out of specification → Adjust.

Standard tire pressure:

100 kPa (1.0 kgf/cm2, 15 psi)

NOTE:

●Check the tire while it is cold.

●Loose bead stoppers allow the tire to slip off its position on the rim when the tire pressure is low.

●A tilted tire valve stem indicates that the tire slips off its position on the rim.

●If the tire valve stem is found tilted, the tire is considered to be slipping off its position. Cor- rect the tire position.

EC36S002

SPOKES INSPECTION AND TIGHTENING

1.Inspect:

●Spokes 1

Bend/damage → Replace. Loose spoke → Retighten.

2.Tighten: ● Spokes

T .

R .

3 Nm (0.3 m · kg, 2.2 ft · lb)

NOTE:

Be sure to retighten these spokes before and after break-in. After a practice or a race check spokes for looseness.

EC36T000

WHEEL INSPECTION

1.Inspect:

●Wheel runout

Elevate the wheel and turn it. Abnormal runout → Replace.

3 - 44