CLEANING AND STORAGE

EC1B0000

GEN INFO

CLEANING AND STORAGE

EC1B1000

CLEANING

Frequent cleaning of your machine will enhance its appearance, maintain good over- all performance, and extend the life of many components.

1.Before washing the machine, block off the end of the exhaust pipe to prevent water from entering. A plastic bag secured with a rubber band may be used for this purpose.

2.If the engine is excessively greasy, apply some degreaser to it with a paint brush. Do not apply degreaser to the chain, sprockets, or wheel axles.

3.Rinse the dirt and degreaser off with a garden hose; use only enough pressure to do the job.

CAUTION:

Excessive hose pressure may cause water seepage and contamination of wheel bear- ings, front forks, brakes and transmission seals. Many expensive repair bills have resulted from improper high pressure detergent applications such as those avail- able in coin-operated car washers.

4.After the majority of the dirt has been hosed off, wash all surfaces with warm water and a mild detergent. Use an old toothbrush to clean hard-to-reach places.

5.Rinse the machine off immediately with clean water, and dry all surfaces with a soft towel or cloth.

6.Immediately after washing, remove excess water from the chain with a paper towel and lubricate the chain to prevent rust.

7.Clean the seat with a vinyl upholstery cleaner to keep the cover pliable and glossy.

1 - 20

Page 36
Image 36
Yamaha WR45OFR service manual Cleaning and Storage