Yamaha WR45OFR service manual Front Fork Chas

FRONT FORK CHAS

21.Measure:

●Distance a

Out of specification → Turn into the locknut.

Distance a:

20 mm (0.79 in) or more Between damper rod 1 top and locknut 2 top.

22.Loosen:

● Rebound damping adjuster 1

NOTE:

●Loosen the rebound damping adjuster finger tight.

●Record the set position of the adjuster (the amount of turning out the fully turned in posi- tion).

23.Install

●Cushion rubber 1

●Washer 2

●Spacer 3

To cap bolt 4.

NOTE:

Install the cushion rubber with its smaller dia.end a facing the cap bolt.

24.Install:

●Push rod 1

●Fork spring 2

NOTE:

●Install the fork spring with the damper rod 3 pulled up.

●After installing the fork spring, hold the damper rod end so that it will not go down.

25.Install:

●Cap bolt 1

Fully tighten the cap bolt onto the damper rod by hand.

5 - 37