REPLACING THE HEADLIGHT BULBS

INSP

ADJ

3.Replace:

Blown fuse

Replacement steps:

Set the main switch to “OFF”.

Install a new fuse of the correct amperage.

Set on the switches to verify if the electri- cal circuit is operational.

If the fuse immediately blows again, check the electrical circuit.

Items

Amperage

Q’ty

rating

 

 

 

 

 

Main fuse

10 A

1

 

 

 

WARNING

Never use a fuse with an amperage rating other than that specified. Improvising or using a fuse with the wrong amperage rat- ing may cause extensive damage to the electrical system, cause the starting and ignition systems to malfunction and could possibly cause a fire.

4.Install:

Fuse cover

Seat

REPLACING THE HEADLIGHT BULBS

1.Remove:

Headlight

Refer to “SEAT, FUEL TANK AND SIDE COVERS” section in the CHAP- TER 4.

2.Remove:

Headlight bulb holder cover 1

3.Detach:

Headlight bulb holder 1

4.Remove:

Headlight bulb 2

WARNING

Since the headlight bulb gets extremely hot, keep flammable products and your hands away from the bulb unit it has cooled down.

3 - 57

Page 122
Image 122
Yamaha WR45OFR service manual Replacing the Headlight Bulbs, Items Amperage ’ty Rating