FRONT BRAKE AND REAR BRAKE CHAS

Å

ı

2.Install:

Brake hose holder 1

Screw (brake hose holder) 2

1 Nm (0.1 m · kg, 0.7 ft · lb)

T . R .

CAUTION:ACHTUNG:

After installing the brake hose holders, make sure the brake hose does not contact the spring (rear shock absorber). If it does, correct its twist.

Brake fluid

1.Fill:

Brake fluid

Until the fluid level reaches “LOWER” level line a.

Recommended brake fluid:

DOT #4

WARNING

Use only the designated quality brake fluid:

otherwise, the rubber seals may deterio- rate, causing leakage and poor brake per- formance.

Refill with the same type of brake fluid; mixing fluids may result in a harmful chem- ical reaction and lead to poor performance.

Be careful that water does not enter the master cylinder when refilling. Water will significantly lower the boiling point of the fluid and may result in vapor lock.

CAACUHTUTIONNG: :

Brake fluid may erode painted surfaces or plastic parts. Always clean up spilled fluid immediately.

ÅFront ı Rear

5 - 25

Page 250
Image 250
Yamaha WR45OFR service manual Install Brake hose holder Screw brake hose holder