Yamaha WR45OFR service manual Storage

CLEANING AND STORAGE

GEN INFO

8.Automotive wax may be applied to all painted or chromed surfaces. Avoid com- bination cleaner-waxes, as they may con- tain abrasives.

9.After completing the above, start the engine and allow it to idle for several min- utes.

EC1B2001

STORAGE

If your machine is to be stored for 60 days or more, some preventive measures must be taken to avoid deterioration. After cleaning the machine thoroughly, prepare it for storage as follows:

1.Drain the fuel tank, fuel lines, and the carburetor float bowl.

2.Remove the spark plug, pour a table- spoon of SAE 10W-30 motor oil in the spark plug hole, and reinstall the plug. With the engine stop switch pushed in, kick the engine over several times to coat the cylinder walls with oil.

3.Remove the drive chain, clean it thor- oughly with solvent, and lubricate it. Reinstall the chain or store it in a plastic bag tied to the frame.

4.Lubricate all control cables.

5.Block the frame up to raise the wheels off the ground.

6.Tie a plastic bag over the exhaust pipe outlet to prevent moisture from entering.

7.If the machine is to be stored in a humid or salt-air environment, coat all exposed metal surfaces with a film of light oil. Do not apply oil to rubber parts or the seat cover.

NOTE:

Make any necessary repairs before the machine is stored.

1 - 21