Yamaha WR45OFR service manual Handlebar Chas, Handlebar Removal

HANDLEBAR CHAS

EC5B0000

HANDLEBAR

Extent of removal:			1 Handlebar removal
Extent of removal		Order	Part name	Q’ty	Remarks
			HANDLEBAR REMOVAL
Preparation for removal			Headlight
		1	Hot starter cable	1	Disconnect at the lever side.
		2	Hot starter lever holder	1
		3	Clutch cable	1	Disconnect at the lever side.
		4	Clutch lever holder	1	Disconnect the clutch switch lead.
		5	“ENGINE STOP” button	1	Disconnect the “ENGINE STOP” button
					lead.
		6	Lights switch	1
		7	Master cylinder	1	Refer to “REMOVAL POINTS”.
	1
		8	Start switch	1	Disconnect the start switch lead.
		9	Throttle cable cap	1
		10	Throttle cable #2 (pushed)	1	Disconnect at the throttle side.
		11	Throttle cable #1 (pulled)	1	Disconnect at the throttle side.
		12	Grip (right)	1	Refer to “REMOVAL POINTS”.
		13	Tube guide	1
		14	Cover (grip cap)	1
		15	Grip (left)	1	Refer to “REMOVAL POINTS”.
		16	Handlebar holder (upper)	2
		17	Handlebar	1
			5 - 40