Using TekCharge MP1800
TekCharge can be used to power or charge any portable device that requires 5V to 5.7V. If your device has a DC jack with center negative polarity, do not power the device with TekCharge as it does not support center negative polarity.
Center Positive | Center Negative |
Charging TekCharge MP1800
1.Plug the included mini USB adapter tip into the input/output cord.
2.Plug the mini USB tip into the mini USB port (5V IN).
3.Plug the USB plug on the opposite end of the input/output cord into a USB port on a computer or a USB power adapter (such as Tekkeon MP1600).
4.Slide the power switch to the ON position. The capacity
indicator lamp will turn red to indicate that you have begun to charge TekCharge. The lamp will turn to orange when the battery is 40% charged, and to green when the battery is 90% charged. The battery will be fully charged in eight hours.
5.When the battery is fully charged, unplug the input/output cord from both TekCharge MP1800 and the computer or charger.
Charging a device using an adapter.
USER GUIDE | 5 |
